Guangzhou Dayu Waterproof Co., Ltd.
Main products:Self-adhesive Bitumen Felt R&D,PVC Waterproof Roll R&D,Torched On Asphalt Sheet R&D,PU Coating R&D,Water-based Waterproof Paint R&D
Products
Contact Us
  • Contact Person : Ms. Peng Terri
  • Company Name : Guangzhou Dayu Waterproof Co., Ltd.
  • Tel : 86-0-15920172205
  • Fax : 86-20-34523626
  • Address : Guangdong,Guangzhou,Rm203-204, Floor1, No.2, Huajinmingyuan, Luoxi New Town, Panyu District, Guangzhou
  • Country/Region : China
  • Zip : 511430

exterior wall coating

exterior wall coating
Product Detailed
excellent resistance to cracking, water, aging, weather. manufacturer of waterproof coatings withi high quality and best price

DY-Acrylic Waterproof Coating

Brief Introduction Single unit acrylic acid elastic waterproof coating is a emulsified coating with the key material imported from abroad and mixing with the good adjuvant and filler. It contains no poison, taste and pollution, which can be used directly on the wet or dry bricks, mortar, concrete, metal, rubber, plasterboard and other bases. Also it can be used as the indoor or outdoor paints or binders.

  

Features 1.Can be used in wet area directly. 2.No poison, no taste, no pollution, simple operation.3.Excellent resistance to crack, water, aging, changeable weather. 4.Can be made into different colors according to client’s requirements.

Acrylic Waterproof Coating finished red color

Application procedure:

1.The base shall be clean before application, keeping no loosing and water on the leveling layer , shall stir in the barrel when gatherring every time to avoid precipitation, if there is precipitation, shall be mixed prior to application.

2.Brush with roller or brusher.

3. After application

Cautions:

1.The waterproof layer shall be brushed twice according to requirements of Acrylic Waterproof Coating.

2.Coating to be as even as possible, without local precipitation; and shall brush twice to keep the coating and base to be stick firmly, without bubbles.

3.Drying time of coating has relatioship with construction site temperature,humidity,ventilation condition, thy drying time will be long if there is low temperature,very humidity and poor ventilation in construction site, instead, the drying time will be shorter.

4.The amount of coating must be in accordance with the provisions of reclaming, can not be too thick or too thin.

Data sheet

Guangdong Province Contruction Products Inspection Center

Test Report

Sample name:DY-Cement  Composite Waterproof Coating

Ref No:GD2011-01-00107

Specifation/modle: DY-JS(I)

Sample No:011-01-00107

Ref Standards:JC/T894-2008

Sample quanity:liquid 2kg, powder 3kg

No.

Test Item

Standard value

Measured value

1

Solid content,%

≥65

68

2

Tensile strength, Mpa

≥1.2

1.52

3

Elongation,%

≥200

236

4

Adhesion strength, Mpa

≥0.5

0.89

5

Watertightness,        (0.3Mpa, 30min)

No leakage

Pass

Conclusion

All test are qualited based on the Ref Standards:JC/T894-2001 's conventional items and instruction .

Remarks

Liquid : Powder= 1: 1.2

exterior wall coating



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.